EHS glossary>Safety term

The Definition of Hazard and Operability Study (HAZOP)

A hazard and operability study (HAZOP) is a structured team review that uses guide words to find how a process could deviate from its design intent and what hazards and operating problems could result.

Plain-English definition
Real-world example
Hazard and Operability Study (HAZOP) definition

Definition of Hazard and Operability Study (HAZOP)

A hazard and operability study (HAZOP) is a systematic, team-based review of a process or operation. The team breaks the process into sections called nodes and applies guide words, such as no, more, less and reverse, to process parameters like flow, pressure and temperature. This helps the team imagine how the process could deviate from its intended design, what could cause each deviation, what the consequences would be, and whether existing safeguards are enough.

HAZOP was developed at Imperial Chemical Industries in the United Kingdom in the 1960s. It is now one of the most widely used methods for process hazard analysis in chemicals, oil and gas, pharmaceuticals, water treatment and food processing.

Why HAZOP Matters

Many serious process incidents start with a deviation nobody imagined: a valve left in the wrong position, a pump running backward or a utility failure during startup. HAZOP forces a team to imagine those deviations one at a time, before the plant is built or changed, when fixes are cheapest.

A HAZOP also builds shared understanding. Operators learn why safeguards exist, engineers learn how the plant really runs, and the resulting records support regulatory compliance, training and future changes.

How a HAZOP Works

Key Terms

  • Node: A section of the process, such as a pump, line or vessel, studied one at a time.
  • Design intent: What the node is supposed to do, such as transfer 100 gallons per minute at a set pressure.
  • Parameter: A measurable property, such as flow, pressure, temperature, level or composition.
  • Guide word: A word that prompts a deviation, such as no, more, less, as well as, part of, reverse and other than.
  • Deviation: The guide word applied to a parameter, such as no flow, more pressure or reverse flow.

Steps

  • Prepare: Gather current piping and instrumentation diagrams, operating procedures and past incident data.
  • Assemble the team: A trained facilitator, a scribe, and people from operations, engineering, maintenance and safety.
  • Work node by node: For each deviation, list causes, consequences and existing safeguards.
  • Rank risk: Many teams use a risk matrix to decide whether safeguards are adequate.
  • Make recommendations: Record actions where risk is too high and assign owners and dates.
  • Close actions: Track recommendations to completion.

Regulations and Standards

  • OSHA PSM: 29 CFR 1910.119(e) requires a process hazard analysis for covered processes and lists HAZOP as an acceptable method. The analysis must be updated and revalidated at least every five years.
  • EPA RMP: The Risk Management Program (40 CFR Part 68) has similar hazard review requirements for covered processes.
  • IEC 61882: The international guide for conducting HAZOP studies.
  • Related studies: HAZOP results often feed into layer of protection analysis and safety integrity level selection.

Good Practices for HAZOP

  • Use up-to-date drawings: Confirm diagrams match the plant as built.
  • Get the right people: Include experienced operators, who know how the process really runs.
  • Use a skilled facilitator: Keep the team focused and avoid skipping guide words.
  • Consider all modes: Review startup, shutdown, maintenance and upset conditions, not only normal running.
  • Avoid long sessions: Limit meeting length to keep the team sharp.
  • Close the loop: Track recommendations and verify they work.
  • Link to MOC: Use HAZOP or a smaller review for changes through management of change.

Common HAZOP Mistakes

  • Outdated P&IDs: Reviewing drawings that do not match the plant produces misleading results.
  • Missing operators: Without frontline experience, realistic causes and workarounds are overlooked.
  • Counting procedures as strong safeguards: Relying on operators to act in seconds is weaker than engineered protection.
  • Skipping non-routine modes: Many incidents happen during startup, shutdown or maintenance.
  • Letting recommendations stall: Open actions from old studies leave known risks in place.

Example of a HAZOP

During a HAZOP of an ammonia refrigeration system, the team applied the deviation reverse flow to a line between two compressors. An experienced operator pointed out that if the second compressor tripped, hot gas could flow backward into a low-pressure vessel not designed for that pressure.

The existing safeguard was a manual valve that operators rarely closed in time. The team recommended a check valve and a high-pressure interlock. Both were installed and tested before the next cooling season.

Frequently Asked Questions: Hazard and Operability Study (HAZOP)

What are HAZOP guide words?

Common guide words are no or not, more, less, as well as, part of, reverse and other than. They are combined with parameters such as flow or pressure to create deviations.

Who should be on a HAZOP team?

A trained facilitator, a scribe, and people with process, operations, maintenance, instrumentation and safety knowledge. Experienced operators are especially valuable.

How often should a HAZOP be done?

Under OSHA's Process Safety Management standard, process hazard analyses must be updated and revalidated at least every five years, and changes should be reviewed through management of change.

What is the difference between HAZOP and HAZID?

A HAZID is a broader, early-stage hazard identification. A HAZOP is a detailed review of process deviations, usually done once detailed design drawings are available.

How long does a HAZOP take?

It depends on the size and complexity of the process. A small system may take a day or two, while a large plant can take several weeks of sessions.

What is the output of a HAZOP?

A HAZOP worksheet listing each node, deviation, cause, consequence, safeguard and risk ranking, plus a list of recommendations with owners and due dates.

Related Terms

Part of SafetyIQ's EHS glossary: plain-English definitions of workplace health and safety terms.

> Keep learning

More EHS terms

Browse the full glossary >

> See it in action

Put these safety terms into practice with SafetyIQ

Capture hazards, run inspections, track training and close out corrective actions in one platform built for high-risk, field-heavy work.

Book my free demo
★★★★★
4.8 out of 5 stars on
G2
G2 High Performer, Fall 2026