EHS glossary>Safety term

The Definition of Failure Mode and Effects Analysis (FMEA)

Failure mode and effects analysis (FMEA) is a bottom-up method that lists the ways each part of a system or process could fail, rates the severity, likelihood and detectability of each, and prioritizes fixes.

Plain-English definition
Real-world example
Failure Mode and Effects Analysis (FMEA) definition

Definition of Failure Mode and Effects Analysis (FMEA)

Failure mode and effects analysis (FMEA) is a structured, bottom-up method for finding how each component, step or function in a system could fail, what the effects of each failure would be, and which failures need action first. A failure mode is the way something fails, such as a valve sticking open, a sensor reading low or an operator skipping a step.

FMEA was first formalized by the US military in the late 1940s and later spread to aerospace, automotive, medical devices, manufacturing and healthcare. In safety, it is used to study equipment, processes and tasks before problems cause harm, and it is one of the methods OSHA accepts for a process hazard analysis.

Why FMEA Matters

Most failures are predictable if someone takes the time to look. FMEA gives teams a disciplined way to walk through every part or step, ask how it could go wrong and decide which problems deserve attention. That is far cheaper than finding the same failures through injuries, recalls or downtime.

FMEA also creates a living record of known risks. When equipment is modified, staff change or an incident occurs, the FMEA shows what was already considered and what controls were relied on, making future decisions faster and better informed.

How FMEA Works

Common Types

  • Design FMEA: Studies a product or equipment design.
  • Process FMEA: Studies the steps of a manufacturing or work process.
  • System or functional FMEA: Studies how functions of a larger system could fail.

Steps

  • Define the scope: Choose the system, process or equipment and break it into parts or steps.
  • List failure modes: For each part or step, list the ways it could fail.
  • Describe effects: Note what each failure would cause, including safety, quality and environmental effects.
  • Find causes and controls: List likely causes and the current controls that prevent or detect them.
  • Rate each failure: Score severity (S), occurrence (O) and detection (D), usually on a 1 to 10 scale.
  • Prioritize: Use the risk priority number or action priority to decide what to fix first.
  • Act and re-rate: Assign actions, then re-score once they are in place.

Risk Priority Number

The traditional risk priority number (RPN) is S x O x D, giving a score from 1 to 1,000. Because very different risks can share the same RPN, the 2019 AIAG and VDA FMEA Handbook used in the automotive industry replaced RPN with an action priority rating of high, medium or low, which puts more weight on severity. Many safety teams also treat any failure with a high severity score as a priority, whatever its RPN.

Regulations and Standards

  • OSHA PSM: 29 CFR 1910.119(e) lists FMEA among the acceptable methods for a process hazard analysis.
  • IEC 60812: The international standard for FMEA and its extension, FMECA, which adds criticality analysis.
  • Automotive: The AIAG and VDA FMEA Handbook guides design and process FMEA for suppliers.
  • Medical devices: FMEA is often used within ISO 14971 risk management.

Good Practices for FMEA

  • Use a cross-functional team: Include operators, maintenance, engineering, quality and safety.
  • Keep scope manageable: Break large systems into smaller pieces.
  • Define rating scales: Agree in advance what each score means so ratings are consistent.
  • Focus on severity: Treat life-threatening failure modes as priorities even when rare.
  • Link to maintenance: Use results to set preventive maintenance and inspection tasks.
  • Keep it alive: Update the FMEA after incidents, design changes and management of change.

Common FMEA Mistakes

  • Chasing high RPNs only: A rare but fatal failure can have a low RPN and still need action.
  • Scope too large: Trying to analyze a whole plant at once leads to shallow results.
  • Inconsistent scoring: Without agreed scales, teams rate similar risks very differently.
  • Leaving out human error: Process FMEAs should include missed steps and wrong settings, not just hardware.
  • Filing it away: An FMEA that is never updated quickly becomes out of date.

Example of FMEA

A packaging plant ran a process FMEA on a new palletizer cell. One failure mode was the light curtain muting function staying active after a pallet left the cell. The effect would be that a worker could walk in while the robot was moving. Severity was rated 10, occurrence 3 and detection 7 because there was no indication to operators that muting was stuck.

The team added monitoring that faults the cell if muting lasts longer than expected, a muting status lamp at the entry and a weekly function test. The new detection score dropped to 2.

Frequently Asked Questions: Failure Mode and Effects Analysis (FMEA)

What is an RPN in FMEA?

The risk priority number is severity times occurrence times detection. It is used to rank failure modes, though many teams now pair it with severity-first rules or action priority ratings.

What is the difference between FMEA and FMECA?

FMECA adds a criticality analysis to FMEA, ranking failure modes by both severity and probability, often with quantitative data.

How is FMEA different from fault tree analysis?

FMEA is bottom-up: it starts with each component's failure modes and asks what happens. Fault tree analysis is top-down: it starts with one unwanted event and works back to its causes.

When should an FMEA be done?

Ideally during design, before equipment or processes are built, and again when they change. It can also be used on existing operations to find weaknesses.

What are the 3 ratings in FMEA?

Severity, which rates how bad the effect would be; occurrence, which rates how likely the cause is; and detection, which rates how likely current controls are to catch the failure before it causes harm.

Who should be on an FMEA team?

People who know the design or process from different angles, such as engineers, operators, maintenance technicians, quality staff and safety professionals. A facilitator keeps the session on track.

Related Terms

Part of SafetyIQ's EHS glossary: plain-English definitions of workplace health and safety terms.

> Keep learning

More EHS terms

Browse the full glossary >

> See it in action

Put these safety terms into practice with SafetyIQ

Capture hazards, run inspections, track training and close out corrective actions in one platform built for high-risk, field-heavy work.

Book my free demo
★★★★★
4.8 out of 5 stars on
G2
G2 High Performer, Fall 2026