Slips, trips and falls are incidents in which a worker loses footing or balance on a walking surface, causing a fall on the same level or to a lower level, and are among the most common workplace injuries.

Slips, trips and falls are a group of incidents in which a person loses footing or balance and falls. A slip happens when there is too little friction between a shoe and the walking surface, often on a wet, oily or icy floor. A trip happens when a foot strikes an object or uneven surface and the body keeps moving forward. A fall can be on the same level or to a lower level, such as off a ladder, platform, loading dock or stairway.
Slips, trips and falls cause a large share of workplace injuries in every industry, from offices and retail to warehouses, healthcare, food service and construction. Falls to a lower level are also a leading cause of workplace deaths. Injuries range from sprains and bruises to fractures, head injuries and back injuries.
Because they seem ordinary, slips and trips are often treated as bad luck rather than preventable hazards. In reality, they are among the most frequent causes of lost-time injuries and workers' compensation claims, and a simple fall can mean weeks away from work.
They are also among the easiest hazards to control. Good housekeeping, the right footwear, better lighting and fast spill response cost little compared with the injuries they prevent, which makes slips, trips and falls a strong place to start any safety improvement effort.
A grocery distribution center recorded a cluster of slip injuries near the cold storage doors. A review found that condensation formed on the concrete each time the doors opened and that some workers wore smooth-soled sneakers.
The site installed air curtains and anti-slip floor coating at the doors, added absorbent mats, provided slip-resistant footwear through a voucher program and added the area to its hourly floor check. Slip injuries in that area dropped to zero over the next six months.
A slip happens when your foot loses grip on the surface, often because it is wet or oily. A trip happens when your foot hits an object or uneven spot and you fall forward.
In general industry, 29 CFR 1910 Subpart D, the walking-working surfaces standard. In construction, Subpart M for fall protection and Subpart X for stairways and ladders.
Clean spills right away, use mats at entrances, improve drainage, apply slip-resistant coatings where needed and require slip-resistant footwear.
Yes. Same-level falls can cause fractures, head injuries and back injuries and often result in days away from work, especially for older workers.
Prevention is far better, but if you fall, try to tuck your chin, relax your body and land on the fleshy parts of your body rather than putting out a stiff arm. Report the fall even if you feel fine.
Employers must keep walking surfaces safe under OSHA rules, while workers help by cleaning or reporting spills, keeping areas tidy and wearing suitable footwear.
Part of SafetyIQ's EHS glossary: plain-English definitions of workplace health and safety terms.
> Keep learning
> See it in action
Capture hazards, run inspections, track training and close out corrective actions in one platform built for high-risk, field-heavy work.
Book my free demo