Lithium-ion battery safety covers the charging, storage, handling and disposal practices that prevent battery fires and explosions caused by thermal runaway in tools, devices, vehicles and energy storage systems.

Lithium-ion battery safety is the set of practices used to prevent fires, explosions and toxic gas releases from lithium-ion batteries. These batteries power cordless tools, phones, laptops, radios, scanners, e-bikes, forklifts, electric vehicles and large energy storage systems.
Lithium-ion batteries store a lot of energy in a small space. When a cell is damaged, overheated, overcharged or defective, it can enter thermal runaway, a self-heating reaction that spreads to nearby cells. The result can be intense fire, jets of flame, explosions and release of flammable and toxic gases, including hydrogen fluoride. Battery fires are hard to put out and can reignite hours later.
Lithium-ion batteries are now in almost every workplace, often in large numbers. A single failing pack can start a fire that spreads quickly to nearby batteries and combustible materials, and the gases released can be toxic in enclosed spaces such as trailers, vehicles and storerooms.
Because these fires behave differently from ordinary fires, standard fire plans may not be enough. Clear rules for buying, charging, storing and disposing of batteries reduce the chance of a fire and help workers respond safely if one starts.
A contractor kept dozens of cordless tool batteries charging overnight on a wooden shelf in a site trailer. One damaged pack went into thermal runaway, and the fire spread to nearby packs and destroyed the trailer. No one was inside.
The contractor set up a charging station on a metal cabinet with a smoke detector, banned overnight charging in occupied buildings, added battery checks to its pre-use inspections and set up a recycling bin for damaged packs. It also added battery fires to its fire prevention plan.
Thermal runaway is a chain reaction in which a battery cell overheats, releases more heat and gas, and spreads the reaction to nearby cells. It can lead to fire or explosion.
Evacuate and call the fire department. Small fires may be fought by trained workers, and large amounts of water help cool cells. Battery fires can reignite, so damaged batteries must be watched and isolated.
It is safest to charge batteries while someone is nearby and awake, on a non-combustible surface, using the correct charger. Avoid unattended overnight charging in occupied areas.
Do not put them in the trash. Isolate them in a non-combustible container, tape the terminals and send them to an approved battery recycler.
Water and some specialty agents help cool small battery fires. Standard ABC extinguishers may knock down flames on nearby materials but often do not stop thermal runaway. See fire extinguisher classes and follow fire department guidance.
Swelling means gas is building up inside the cells because of damage or aging. Stop using the battery, move it to a safe non-combustible place away from combustibles and arrange for proper disposal.
Part of SafetyIQ's EHS glossary: plain-English definitions of workplace health and safety terms.
> Keep learning
> See it in action
Capture hazards, run inspections, track training and close out corrective actions in one platform built for high-risk, field-heavy work.
Book my free demo