The fire triangle is a model showing that fire needs heat, fuel and oxygen, and the fire tetrahedron adds the chemical chain reaction. Removing any one element prevents or puts out a fire.

The fire triangle is a simple model that shows the three things a fire needs to start and keep burning: heat, fuel and oxygen. If any one side of the triangle is missing, a fire cannot start, and taking one away from a burning fire will put it out.
The fire tetrahedron adds a fourth element: the self-sustaining chemical chain reaction that keeps flames going. This explains how some extinguishing agents, such as dry chemicals and clean agents, work by interrupting the reaction rather than only cooling or smothering.
The model is the foundation of fire prevention and firefighting training. It helps workers understand why housekeeping, hot work controls, ventilation and the right extinguisher all matter.
Workplace fires cause injuries, deaths, lost production and business closures. Most can be traced to a predictable combination of an ignition source near fuel, in an area with plenty of air. The fire triangle gives every worker a simple way to see that combination and break it before a fire starts.
It also guides response. Knowing which side of the triangle an extinguisher attacks helps workers choose the right tool and avoid dangerous mistakes, such as spraying water on burning grease or live electrical equipment.
Heat raises fuel to its ignition temperature. Workplace ignition sources include open flames, sparks from grinding and welding, hot surfaces, electrical arcs, friction and static discharge.
Fuel is anything that can burn: wood, paper, cardboard, plastics, flammable liquids, gases and combustible dust. Liquids burn as vapor, so a liquid's flash point shows how easily it can ignite.
Normal air contains about 21 percent oxygen, which is plenty to support burning. Oxygen-enriched atmospheres and oxidizers make materials ignite more easily and burn faster.
Burning releases free radicals that keep the reaction going. Agents that break this chain can put out a fire even when heat, fuel and oxygen are still present.
Matching the agent to the fuel is why fire extinguisher classes exist. Water on a grease or energized electrical fire can make things worse.
At a furniture plant, a small fire started in sawdust under a sander when a worn belt overheated. Workers put it out with an extinguisher, but the review showed all three sides were present every day: dust buildup as fuel, friction as heat and plenty of air.
The plant added dust collection at each sander, set a daily cleanup routine, put belt checks into preventive maintenance and used the fire triangle in its next safety training to show how each step removes one side.
Heat, fuel and oxygen. A fire needs all three to start and continue burning.
The fire tetrahedron adds a fourth element, the chemical chain reaction. It explains how agents that interrupt the reaction can put out fires.
Remove at least one element: cool it with water to remove heat, smother it to remove oxygen, or shut off or remove the fuel.
It gives a simple way to spot fire risks and choose controls. Most fire prevention steps work by keeping fuel, heat and oxygen from coming together.
Common sources include electrical faults, hot work such as welding and cutting, hot surfaces, friction from machinery, smoking materials and static electricity.
Yes, but dust explosions need two more conditions: the dust must be dispersed in the air and confined. These five elements are often called the dust explosion pentagon.
Part of SafetyIQ's EHS glossary: plain-English definitions of workplace health and safety terms.
> Keep learning
> See it in action
Capture hazards, run inspections, track training and close out corrective actions in one platform built for high-risk, field-heavy work.
Book my free demo