EHS glossary>Safety term

The Definition of Swiss Cheese Model

The Swiss cheese model is James Reason's accident causation model, which shows how accidents happen when weaknesses in several layers of defense line up and let a hazard pass through to cause harm.

Plain-English definition
Real-world example
Swiss Cheese Model definition

Definition of the Swiss Cheese Model

The Swiss cheese model is an accident causation model developed by psychologist James Reason and described in his 1990 book Human Error. It pictures an organization's defenses as a stack of cheese slices. Each slice is a layer of protection, such as design, procedures, training, supervision or equipment. Each slice has holes, which are weaknesses. An accident happens when the holes in every slice line up at the same moment and let a hazard pass all the way through.

The model is widely used in healthcare, aviation, process industries and occupational safety. Its key message is that accidents rarely have a single cause. They result from several failures, many of them created long before the event.

Why the Swiss Cheese Model Matters

After an incident, it is tempting to blame the last person who touched the equipment. The Swiss cheese model shows why that rarely prevents the next event. If the deeper holes in design, staffing, maintenance or supervision stay open, another person will eventually fall through the same gap.

The model also gives teams a shared, easy-to-picture language. Operators, managers and engineers can all understand the idea of layers and holes, which makes it easier to discuss system weaknesses openly and agree on fixes.

Key Concepts of the Swiss Cheese Model

Active Failures

Active failures are unsafe acts by people at the sharp end, such as operators, drivers and technicians. Examples include slips, lapses, mistakes and violations. Their effects are usually immediate.

Latent Conditions

Latent conditions are hidden weaknesses created by decisions made by designers, managers and organizations. Examples include understaffing, poor equipment design, unclear procedures, time pressure and weak maintenance. They can lie dormant for years until they combine with an active failure.

Moving Holes

The holes are not fixed. They open, close and shift as conditions change, such as a new shift pattern, a missing tool or a temporary workaround. This is why a system that has worked for years can fail suddenly.

How the Model Is Used

  • Incident investigation: Investigators look past the last person involved to find the latent conditions in every layer.
  • Risk assessment: Teams list the layers of defense for a hazard and look for holes before an incident.
  • Design of defenses: Adding independent layers, or shrinking holes, reduces the chance they line up.
  • Culture: The model supports a just culture by showing that blaming an individual rarely fixes the system.

The model links closely to the hierarchy of controls and to bow-tie analysis, which also map barriers between a hazard and harm.

Limitations of the Model

  • Simplified: It does not explain how holes are created or how layers interact.
  • Static picture: Real systems are dynamic, and newer approaches such as systems thinking and resilience engineering address that.
  • Hard to measure: It does not give a method to quantify risk.

Regulations and Standards

No regulation requires the Swiss cheese model. However, OSHA's incident investigation guidance, Process Safety Management incident investigation requirements (29 CFR 1910.119(m)) and management system standards such as ISO 45001 all expect organizations to look beyond immediate causes to underlying system causes, which the model helps teams do.

Good Practices for Applying the Swiss Cheese Model

  • Map the layers: For each major hazard, list every layer of defense from design to PPE.
  • Ask about each layer: During investigations, ask why each layer failed, not just the last one.
  • Look upstream: Examine staffing, scheduling, procurement and design decisions as latent conditions.
  • Keep layers independent: Avoid defenses that fail for the same reason.
  • Use near misses: A near miss shows holes lining up before harm occurs.

Common Mistakes When Using the Model

  • Stopping at the last slice: Naming the worker's error as the cause ignores every other layer.
  • Counting layers that are not independent: Two controls that depend on the same person or power supply are really one layer.
  • Relying on PPE as the main layer: PPE is the last slice, not the first line of defense.
  • Ignoring workarounds: Normal shortcuts often create the holes that line up during an accident.
  • Treating it as a full method: The model is a way of thinking, so pair it with structured investigation tools.

Example of the Swiss Cheese Model

A maintenance technician was injured when a conveyor started while he was clearing a jam. The first review blamed him for not locking out. Using the Swiss cheese model, the investigation found more holes: the lockout point was 40 feet away, the jam occurred several times a shift, production targets discouraged stopping the line, the guard had been removed and not replaced, and supervisors had tolerated the shortcut for months.

The company relocated the isolation point, redesigned the transfer to reduce jams, replaced the guard with an interlocked one and changed how production targets handled downtime for jam clearing.

Frequently Asked Questions: Swiss Cheese Model

Who created the Swiss cheese model?

Psychologist James Reason developed it and described it in his 1990 book Human Error. He expanded on it in later work on organizational accidents.

What do the holes in the Swiss cheese model represent?

They represent weaknesses in each layer of defense. Some are active failures by people at the front line, and others are latent conditions built into the system.

What is the difference between active failures and latent conditions?

Active failures are unsafe acts with immediate effects. Latent conditions are hidden weaknesses created by earlier decisions that can wait years before contributing to an accident.

Is the Swiss cheese model still used?

Yes. It is one of the most widely used models in safety, though many practitioners pair it with newer systems approaches.

What are examples of slices in the Swiss cheese model?

Typical slices include equipment design, engineering controls, procedures, training, supervision, permits, inspections, alarms and personal protective equipment.

How does the Swiss cheese model relate to the hierarchy of controls?

Both focus on layers of protection. The hierarchy of controls ranks which types of layers are most effective, while the Swiss cheese model shows how failures in several layers combine to cause an accident.

Related Terms

Part of SafetyIQ's EHS glossary: plain-English definitions of workplace health and safety terms.

> Keep learning

More EHS terms

Browse the full glossary >

> See it in action

Put these safety terms into practice with SafetyIQ

Capture hazards, run inspections, track training and close out corrective actions in one platform built for high-risk, field-heavy work.

Book my free demo
★★★★★
4.8 out of 5 stars on
G2
G2 High Performer, Fall 2026