Isocyanate exposure is contact with reactive chemicals such as MDI, TDI and HDI used in polyurethane paints, foams and coatings, and it is a leading cause of work-related asthma.

Isocyanate exposure is breathing in or touching isocyanates, a family of highly reactive chemicals used to make polyurethane products. Common types include methylene diphenyl diisocyanate (MDI), toluene diisocyanate (TDI) and hexamethylene diisocyanate (HDI).
Isocyanates are a leading cause of work-related asthma. Once a worker becomes sensitized, even very small later exposures can trigger a severe asthma attack, and the sensitivity is usually permanent. Isocyanates also irritate the skin, eyes and lungs and can cause skin sensitization.
Isocyanate asthma can end a career. A painter or foam installer who becomes sensitized may never be able to work around these chemicals again, and continued exposure can cause severe or even fatal attacks. Because sensitization can happen after a single large exposure or many small ones, prevention has to start on day one.
Isocyanates are also hard to detect. They have little odor at harmful levels, and symptoms often start hours after work, so workers and supervisors may not connect illness to the job. Strong controls and early symptom checks are the best defense.
OSHA has no single isocyanate standard. Instead it relies on:
NIOSH and the EPA publish guidance for spray polyurethane foam and auto refinishing. The ACGIH sets low threshold limit values for several isocyanates.
A painter at a collision repair shop developed a cough and chest tightness that got worse each evening and eased on weekends. He had been mixing and spraying clear coat with only a disposable dust mask, and sometimes sprayed small parts outside the booth.
His doctor diagnosed occupational asthma. The shop banned spraying outside the booth, provided supplied-air hoods and chemical-resistant gloves, trained staff on isocyanate hazards and started yearly lung function testing. The painter was moved to a role away from coatings.
Two-part polyurethane paints and clear coats, spray foam insulation, truck bed liners, some adhesives, floor coatings and polyurethane foam manufacturing materials.
No. Dust masks do not stop isocyanate vapor. Supplied-air respirators are generally recommended for spraying, and any respirator must be part of a full respiratory protection program.
Sensitization means the immune system reacts to isocyanates after an earlier exposure. Afterward, even tiny amounts can trigger asthma, so the worker usually has to avoid all further exposure.
Not a dedicated one. OSHA enforces ceiling limits for some isocyanates, along with respiratory protection, spray finishing and hazard communication rules, and has targeted inspections through a National Emphasis Program.
Symptoms include coughing, wheezing, chest tightness, shortness of breath, runny nose, watery eyes and skin rashes. Asthma symptoms may appear several hours after exposure, often in the evening or at night.
It depends on the product and ventilation. Manufacturers give re-entry and re-occupancy times, often ranging from several hours to a day or more. Follow the specific product guidance.
Part of SafetyIQ's EHS glossary: plain-English definitions of workplace health and safety terms.
> Keep learning
> See it in action
Capture hazards, run inspections, track training and close out corrective actions in one platform built for high-risk, field-heavy work.
Book my free demo