Beryllium exposure is breathing or touching dust and fume from beryllium metal, alloys or slag, which can cause chronic beryllium disease and lung cancer and is regulated by OSHA 1910.1024.

Beryllium exposure is contact with beryllium, a lightweight, strong metal, through breathing its dust, fume or mist or through skin contact. Beryllium is used in aerospace, defense, electronics, medical devices and nuclear applications, often as a beryllium-copper alloy for springs, connectors and non-sparking tools.
Even small amounts of airborne beryllium can sensitize a worker's immune system. Sensitized workers can go on to develop chronic beryllium disease (CBD), a serious and often disabling lung disease that can appear years after exposure. Beryllium is also a known human carcinogen linked to lung cancer.
Beryllium is unusual because the dose that causes harm can be extremely small, and because individual reactions vary. Some workers become sensitized after brief, low exposures while others with more exposure never do. Chronic beryllium disease can progress for years after exposure ends and is often misdiagnosed as other lung conditions.
Many people who work with beryllium do not know it. It appears as a minor ingredient in copper alloys, ceramics and some abrasive blasting slags. Knowing where it is, measuring exposure and catching sensitization early are the keys to preventing lifelong illness.
OSHA's beryllium rules were updated in 2017 and appear at 29 CFR 1910.1024 for general industry, 1915.1024 for shipyards and 1926.1124 for construction. Key requirements include:
A precision machine shop added beryllium-copper connector parts to its work. Operators used the same open lathes and wiped chips off with rags. When the customer asked for exposure data, personal air samples showed beryllium above the 0.1 microgram action level during deburring.
The shop moved beryllium work to an enclosed cell with HEPA extraction, issued dedicated coveralls laundered on site, wrote an exposure control plan and offered BeLPT testing to the operators. One worker was found to be sensitized and was moved to work away from beryllium under medical removal protection.
OSHA's limit is 0.2 micrograms per cubic meter as an 8-hour average and 2.0 micrograms per cubic meter over 15 minutes. The action level is 0.1 micrograms per cubic meter.
Chronic beryllium disease is a lung disease caused by an immune reaction to beryllium. It causes scarring in the lungs and can develop months or decades after exposure.
Workers who machine, weld, cast or recycle beryllium alloys, work with beryllium oxide ceramics, make dental appliances, or blast with coal or copper slag.
Yes. The beryllium lymphocyte proliferation test (BeLPT) is a blood test that shows whether the immune system has become sensitized to beryllium.
There is no cure, but treatment such as corticosteroids can slow the disease and ease symptoms. Removing the worker from further exposure is essential once sensitization or disease is found.
Solid beryllium-copper parts are generally low risk to handle. The hazard comes from dust, fume or mist created when the material is machined, ground, welded, polished or melted.
Part of SafetyIQ's EHS glossary: plain-English definitions of workplace health and safety terms.
> Keep learning
> See it in action
Capture hazards, run inspections, track training and close out corrective actions in one platform built for high-risk, field-heavy work.
Book my free demo