Hydrogen sulfide (H2S) exposure is contact with a toxic, flammable gas found in oil and gas, sewers and pulp mills that can deaden the sense of smell and kill within minutes at high levels.

Hydrogen sulfide (H2S) exposure is breathing in, or being surrounded by, hydrogen sulfide gas at a concentration that can harm health. H2S is a colorless gas that forms when organic matter breaks down without oxygen, and it is also released from sour crude oil and natural gas.
H2S is one of the leading causes of sudden death from gas in the workplace. It is heavier than air, so it collects in pits, tanks, sumps, manholes and other low spots. It smells like rotten eggs at very low levels, but at higher levels it quickly paralyzes the sense of smell, so workers can no longer tell it is there. Many fatal incidents involve a would-be rescuer who entered a space to help a collapsed coworker.
Workers at risk include those in oil and gas drilling and production, refineries, wastewater treatment, sewer maintenance, pulp and paper mills, tanneries, livestock and manure handling, landfills and any confined space where organic material can rot.
H2S is dangerous because it gives a false sense of safety. The smell that warns workers at low levels disappears just as the gas reaches harmful levels, and a single breath at very high concentrations can cause collapse. It often builds up silently in places that seem routine, such as a lift station, a tank that has been drained or a manure pit that was safe yesterday.
The hazard is also easy to underestimate because it is intermittent. Agitating sludge, opening a valve or a change in weather can release a pocket of gas in seconds. That is why H2S safety depends on continuous monitoring, controlled entry and planned rescue rather than judgment in the moment.
H2S is also flammable, with a lower explosive limit of about 4 percent in air. When it burns it produces sulfur dioxide, another toxic gas. Areas with H2S need control of ignition sources as well as breathing protection.
At a municipal lift station, a maintenance worker climbed down to clear a blocked pump. His single-gas detector was in the truck. He collapsed at the bottom of the wet well. A coworker started down the ladder after him but stopped when his own detector alarmed at 60 ppm, and he called the fire department instead. The first worker survived with lung injuries after a rescue team using breathing apparatus pulled him out.
The utility then required four-gas detectors to be clipped on before opening any hatch, set the H2S low alarm at 5 ppm, added forced ventilation to its entry procedure and installed a tripod and winch so workers could be retrieved without anyone entering the well.
At low levels H2S smells like rotten eggs. At around 100 ppm it deadens the sense of smell, so the odor fades even as the danger grows. Smell should never be used to judge whether an area is safe.
OSHA's general industry ceiling is 20 ppm, but many employers follow the ACGIH limit of 1 ppm as an 8-hour average. Detectors are commonly set to alarm at 5 or 10 ppm so workers can leave before levels become harmful.
It is common in oil and gas production, refineries, sewers, wastewater plants, pulp and paper mills, manure pits, tanneries and landfills. Any closed space with rotting organic matter can contain it.
Do not go in after them without breathing apparatus. Leave the area upwind, raise the alarm and call trained rescuers. Many H2S deaths are rescuers who entered without protection.
Yes. H2S is slightly heavier than air, so it tends to collect in low areas such as pits, trenches, basements and the bottom of tanks. Wind and ventilation can still move it, so monitoring is needed in the breathing zone too.
Early symptoms include eye irritation, sore throat, cough, headache, nausea and dizziness. Higher exposures cause confusion, loss of smell, difficulty breathing, collapse and unconsciousness. Anyone exposed should be moved to fresh air and given medical care.
Part of SafetyIQ's EHS glossary: plain-English definitions of workplace health and safety terms.
> Keep learning
> See it in action
Capture hazards, run inspections, track training and close out corrective actions in one platform built for high-risk, field-heavy work.
Book my free demo